TESLA Tallica Sub Ohm Tank Review


#1

“Being Simple and reliable” has always been the character of Sub ohm tanks. Simpleness means having no tedious DIY process, but also reducing the frequency of oil injection and core replacement; and reliability is to avoid problems such as oil leakage and short circuit during in use. Today, I share with you such a great one manufactured by Tesla - TALLICA TANK.

Product Details:
Resistance: 0.18 ohm ( 60W - 110W ) TS - XX coil / 0.2 ohm ( 80 - 140W ) TS - S coil
Thread: 510 thread
Capacity: 6ml
Diameter: 26mm

Main Features:

  1. Huge cloud and extremely dense flavor
  2. Equipped with other 810 drip tip on the market
  3. Slide filling system
  4. Plug-n-pull coil change
  5. The triangular air flow system

The tank is with the convenient slide filling system and the oil injection hole is large enough , which is convenient for various dropper. The inner pad with the seal and anti-slip function is fixed with a ball structure.

Its structure in the middle section is easily reminiscent of the RTA, since the atomizing space for most finished atomizers is inside the atomizing core. Therefore, its role is mainly to support the upper and lower convergence, lengthening the flue to finish non-destructive core change.

The atomizing core and the cover are fixed by pressing, so the replacement is very convenient.But when the atomizing core is disassembled, the electrode rubber ring is easy to falling off, so the stress point should be in the bottom groove of the atomizing core. After the atomizer is removed, you will find that the 6ml oil storage capacity is not limited to the glass warehouse, but also including the invisible space in the stainless steel cover.

There are some mesh heating wires in the atomizing core. With such a structure, heat generation can be made uniform, and the contact area between your liquid and the wires can be fully increased, so that you can get a full and balanced taste experience. The delicate cotton cores are layered and stacked to effectively disperse conductive fumes and ensure adequate liquid storage.

The larger base space provides smooth air intake conditions. The electrodes are two simple square bumps, which are also very convenient for cleaning and maintenance. With the cover structure in the middle section, this TALLICA TANK has a very strong potential of RBA, and if the vendor develops an adapted wires accessories, you will get wonderfull DIY experience.

The large storage space provides an effective guarantee for daily life. Due to its large area of mesh heat structure, you will get the experience with delicate taste and huge cloud.

With low resistance , the tank can match with the dual-electricity mod which will offer sufficient power. On the whole, the TALLICA TANK is a good choice with a rough design style and a delicate taste experience.


#2

Awesome post